8 in 1 Digital Tyre Gauge (DTG-81)

*Compass *LED flash light. *Back lighted LCD for use in the dark. *Bleeder valv

*Compass.*LED flash light. * Multi-scales: PSI, Bar, Kgf/cm² , Kpa. *Back lighted LCD for use in the dark. *Bleeder valve for pressure adjustment. * Digital tread depth gauge * The hammer easily shatters glass to free when doors are jammed on land or under water * The seatbelt cutter quickly slices through a jammed Specifications(Tyre Gauge) Range: 0~200PSI, 0~14.0Bar, 0~14.0Kgf/cm, 0~1400Kpa. Resolution: 0.1PSI, 0.01Bar, 0.01Kgf/cm² , 1Kpa. Accuracy: ± 1%(0~100PSI) ± 2%(100~200PSI) Specifications(Tread Depth Gauge) Range: 0~20mm/0.8" Resolution: 0.01mm/0.0005" Power: 3 PCS AAA batteries Operation Temp.: -5 C~50 C Operating Instructions * Press any button to switch on. * In the situation for measuring tyre pressure: 1. Check pressure before driving when tyres are cold. 2. Press the"MOLD"button. When PSI, Bar, Kgf/cm or Kpa Display, the unit is in the system for measuring tyre pressure. 3. Press"UNITS"button to choose the unit you Prefer: PSI, Bar, Kgf/cm² Or Kpa. 4. Place the chuck of the gauge onto the tyre valve, Pressing firmly to insure a good seal. 5. Hold in place for about 3-4 seconds, remove and note reading. 6. If the pressure is too high, press the bleeder valve to Relief until you get the right pessure. *In the situation for measuring tyre tread depth: 1. Press the "MOLD" button. When "mm"or"in"display, the unit Is in the system for measuring tread depth. 2. Press"UNIT"button to choose the unit you prefer: Mm or in. *Auto power off. Note: 1. Put this Digital Tyre Gauge near by hand in your car. 2. Usually, do not use the blade to keep sharp. For more details, please kindly visit our website. In addition, we also supply the following products: (1) Measuring Tools------Vernier Calipers, Electronic Digital Calipers, Micrometers, Dial Indicators, Squares, Protractors, Gages, etc (2) Machinery Accessories------Tool Post and Holder, Collects, Chucks, Drill Chucks, Milling Arbors, Sleeves, Vises, Working Tables, etc (3) Cutting Tools------including Drills, End Mills, Milling Cutters, Slitting Saws, Saw Blades, Reamers, Taps & Dies, Tool Bits, Carbide Inserts, etc (4) Machinery------Metal Working Machines, Woodworking Machines, Shear Bending and Rolling Machine, etc Rolling Machine, etc